Quality management system meets the standards of ISO 9001:2008 as well as ISO 13485 and 14001.
All thermocouple wire calibration results and data are traceable to NIST by calibrating against Pt-67 wire.
Safina Materials thermocouple wire is produced in compliance with ASTM E220-07a and ASTM E230 and the standard EN 60584 – 1. EN 60584 – 1 stems from the international temperature range ITS -90 and complies with the temperature limits defined in IEC 584 – 2.
Safina Materials provides fixed point calibration services that are accredited by the Czech Institute for Accreditation according to DIN EN ISO / IEC 17015:2005. Reference materials: Zn (419.527 ⁰ C), Al (660.323 ⁰ C), Ag (961.78 ⁰ C), Au (1064.18 ⁰ C), Pd (1553.5 ⁰ C).
Each manufactured batch is tested and provided with calibration data and a quality certificate. Batches are calibrated using the exact finished wire diameter shipped and all wire samples are obtained from the front, middle and back of each wire lot.
Types R and S are available in special limits (+/- 0.6⁰ C or 0.1%) and standard grade (+/- 1.5⁰ C or 0.25%). Type B is available in special limits (0.25% ⁰ C). “Reference grade” is an industry term referring to special limits wire.
All wire is annealed, cleaned and checked to assure uniform surfaces that promote wire life and performance. Special customer requirements including tensile strength and elongation test results can be supplied upon request.
Safina Materials produces a full range of diameters including custom diameters. Wire diameter is uniform and within limits of +/- 0.0002”.
Safina Materials manufactures paired thermocouple types R (Pt v Pt13Rh) S (Pt v Pt10Rh) and B (Pt6Rh v Pt30Rh). Single legs R-/S- (pure Pt), S+ (Pt10Rh), R+ (Pt13Rh), B- (Pt6Rh) and B+ (Pt30Rh) are also available.
